Pressing Machines
1) Hydraulic Press
- Multi – directional (3D) forging press
- Bicycle parts extrusion forming press
- Cold forging extrusion press
- powder compacting hydraulic press
- Servo guide hydraulic press
- Deep drawing forming hydraulic press
- Jigsaw cutting hydraulic press
- Fast single pressure hydraulic press
- Hot press forming hydraulic press
- Four-column servo-driven hydraulic press
- Commonly used hydraulic press series
2) Hydro pneumatic Press
The ease of use of a pinion-rack press with the strength of a hydraulic press
The System
The MOP series presses work with compressed air up to 6 bar.
Thanks to the built-in pressure booster, they can develop high thrust forces without effort for the operator.
They combine the practicality of use of a rack press with the thrust force of a hydraulic press.
How it Works
1 – press at rest
2 – approach stroke
The lever activates the descent of the stem by means of a rack / pinion device, allowing the tool to approach the workpiece
3 – slip clutch stroke
The subsequent lowering of the lever engages the force intensifier
4 – power stroke
By pressing the side button, the pneumo-hydraulic intensification performs the working stroke
The Advantages of Manual Operation
The combination of approaching the piece with a manual lever and the pressing force generated by a separate and independent pressure multiplier, gives the MOP presses a series of advantages:
Easy-to-use
The approach to the piece to be pressed is achieved by simply lowering the lever, without effort.
The hydraulic power is self-switching and effortless for the operator
Control of the contact point
The operator, during the descent of the rod, can precisely control the point of contact with the piece and easily and precisely center himself on it.
Silence
The noise of the press is limited to the development phase of the pressing stroke and falls within the low limits established by law.
Economy
The phases of approach to the piece and return are completely manual and controlled by the operator.
This translates into limited energy consumption.
3) Servo Press
Higher Speed, Greater Precision, Enhanced Interfacing
Next Generation Servo Press
Features
Easy Installation
– Ethernet port included as standard equipment
– Choose from 6 different Field Network types
– Low noise and clean work environment
– Much lower running cost compared with oil and air presses
– Easy program teaching
Faster ram movement for higher productivity
Max. ram speed up 2.5x; ram acceleration up 3.5x over our previous model.
Broad range of functions
A variety of pressing and sensor functions for high applicability many different fields.
Superior functionality contributes to higher production quality
Load Display Precision: ±0.8% (FS)＊1
Repeatability: ±0.005mm＊2
＊1 Value at 5% or more of maximum pressing capacity under constant environmental conditions.
＊2 Value with the press unit at a constant temperature.
Clean Room Compatible Model
Compatible with Class ISO4* (Class 10 for US Federal Standard 209D) environments and usable both inside and outside a clean room, our clean room model features airtight exhaust pipe connectors for cleaning systems, antistatic external finishing grease and a protective bellows covering the ram.
*Clean class is based upon ISO14644-1.
Target Industries: Medical sector, Life-Science sector and Semi-Conductor sector etc.
Global Diagnostic Functionality
Comprehensive hardware diagnostics (including PC boards)
Its easy to switch among display languages; teach in one language and edit or run your program in another!
Auto Amp Adjustment ・Auto Load Calibration
Perform periodic load calibration automatically.＊3
＊3 Please consult with us about compatible load cells.
